Sap2000 ile deplasman verebilmek için bir çok örnek üzerinde deplasman nereye
verileceği çubuk uçlarına mı yoksa düğüm noktalarına mı verileceği araştırıldı. Bu
deplasmanın gerçek sonuç vereceği sistemler çözülüp sonuçlar test edildi.
Uzay kafes sistemi çelikten yapılan bir yapıdır. Dünya'da çelik vazgeçilmez bir
malzeme haline gelmiştir, çeliğin kullanımı günler geçtikçe yaygınlaşmaktadır. Uzay kafes
sistemleri tamamen çelikten oluşur ve birçok değişik yapılarda çatı olarak kullanmaktadır.
Uzay kafes sisteminin montajını yaparken birçok işçi bolun (civata) sıkma hataları ve diğer
hatalar oluşturmaktadır. Birleşim yerleri en çok problemli yerlerdir. Bir uzay kafes
sistemde herhangi bir çubuğun gereğinden fazla sıkılması durumunda çubuklara gelen
kuvvetlerin nasıl değiştiği araştırıldı, bu araştırma sonucunda hatalı bir montaj yapılması
durumunda kafes kiriş elemanlarındaki değerlerin önemli ölçüde değişebildiği gözlendi.
Düşünülmeyen bir hatanın söz konusu sistemin güvenliğini büyük ölçüde etkilediği
görülmüştür.
In this project, a number of examples have been studied to determine whether the
displacement value should be applied at the rod ends or at the nodes in order to apply the displacement to a space frame on Sap2000 program. Those example systems that produce real results from this displacement are solved, and their results are tested. Space frame systems are steel made structures. Steel has become an indispensable
material in the World, thus the use of steel as days going on is becoming widespread.
These systems are used as roof for different types of structures. There are a lots of errors
made by the workers or others during the installation of the system on the site. Those
errors mainly related with the connection node in tightenning the bolts, thus we can say
that joints are the most critical places. The variation of the forces acting on any space
frame resulting from inappropriate bolt tightenning of those system elements are analyzed. As a result of this research, during the faulty installation of the space frame elements, the force values changes substantially from the actual forces taken in the design. It is observed that an unestimated mistake can have a big impact on the system.