Bu çalısmada manyezit artıgından magnezyumun hidroklorik asit çözeltisi ile
özütlenerek kazanılması ve özütleme süreci sonunda elde edilen özüt çözeltisinden
magnezyum klorür hekzahidrat (MgCl2.6H2O) üretimi arastırılmıstır.
Katı-sıvı özütleme süreci üzerine sıcaklık, asit derisimi, katı/sıvı oranı, tane
boyutu, karıstırma hızı ve sürenin etkileri incelenmistir. Sıvı faza alınan magnezyum
miktarının sıcaklıgın, asit derisiminin ve sürenin artmasıyla arttıgı, katı/sıvı oranının ve
tane boyutunun artmasıyla azaldıgı saptanmıstır. Karıstırma hızının ise özütleme
verimini etkilemedigi bulunmustur.
Ortalama 100 μm tane boyutlu manyezit artıgının 40 ºC sıcaklıkta, 1 g/100 ml
katı/sıvı oranında, 1250 devir/dk karıstırma hızında 1,0 M HCl çözeltisi ile 60 dk süre
ile özütlenmesi sonucu elde edilen çözeltinin kristallendirilmesi ile % 90’nın üzerinde
saflıkta magnezyum klorür hekzahidrat üretilmistir.
In this research, the recovery of magnesium from magnesite residue by solidliquid
extraction using hydrochloric acid, and the production of magnesium chloride
hexahydrate from the extraction solution were investigated.
The effects of temperature, acid concentration, solid/liquid ratio, particle size,
stirring rate and time on the exraction process were determined. It was determined that
the extracted magnesium amount increased with increasing temperature, acid
concentration and time, and with decreasing solid/liquid ratio and particle size. It was
found that the stirring speed did not affected the magnesium extraction yield.
Magnesium chloride hexahydrate in the purity of higher than % 90 was product
by crystallization of the solution obtained by the exraction of magnesite residue at a
temperature of 40 °C, an acid concentration of 1.0 M, a solid/liquid ratio of 1/100 g/ml,
an average particle size of 100 μm, a stirring rate of 1250 rpm and a time of 60 min.