Bu çalışmada, kesikli adsorpsiyon yöntemi kullanılarak sulu çözeltilerden nikel giderimi araştırılmıştır. Bu amaçla, sepiyolit, klinoptilolit ve bentonit adsorban olarak kullanılmıştır. Deneysel çalışmalarda pH, temas süresi, sıcaklık, adsorban dozu, başlangıç derişimi gibi parametrelerin nikel giderimine etkisi incelenmiş, adsorpsiyon kinetiği ve adsorpsiyon izotermi çalışmaları yapılmıştır. Kinetik çalışmalar sonucunda adsorpsiyon verilerinin tüm adsorbanlar için ikinci mertebe kinetik modele uyduğu gözlenmiştir. İzoterm çalışmalarında ise Langmuir ve Freundlich izoterm modelleri denenmiş ve deneysel verilerin bentonit ve klinoptilolit için Freundlich, sepiyolit için Langmuir izoterm modellerine uyduğu belirlenmiştir. Ayrıca her üç adsorban için termodinamik parametreler elde edilmiştir.
In this study, nickel removal was investigated using batch adsorption method from aqueus solutions. For his purpose, sepiolite, clinoptilolite and bentonite were used for as adsorbents. During the experimental part of this study, the effect of parameters such as pH, contact time, temperature, adsorbent dosage, initial concentration on nickel removal were observed and adsorption kinetics, isotherm studies were made. As a result of the kinetic studies, it was observed that the adsorption data conforms to the secondorder kinetic model. In the isotherm studies, Langmuir and Freundlich isotherm models were applied and it was determined that the experimental data conformed to Freundlich isotherm model for bentonite and clinoptilolite to Langmuir isotherm model for sepiolite. Thermodynamically parameters found for each three adsorbents.